Engineering interface illustration · dimensions from selected drawing
Choose the bore in 0.1 mm request steps. Validate the elastic body.
Specify examples such as 7.2, 11.5 or 14.2 mm with OD and height limits. Bore changes affect loading-land width, stress, stiffness and bridge response. Select a cable or CC19/M8 interface and TEDS if required.
Dimensions above convert to mm in the reference. $260–$480 indicative bare-sensor range; MOQ one. Confirm the selected drawing, interface, calibration and dispatch in your quote.
Section concept · use the selected drawing for contact dimensions
LOAD INTRODUCTION / KEEP THE COVER CLEAR
Load the active ring. Support the outer ring.
The relieved cover protects the strain-gauge region. A washer must bear on the designated land without touching the cover or connecting the moving load to the fixed support.
Mounting review targets
Contact surface ≥40 HRC; flatness ≤0.01 mm. Matched washer option targets HRC 48 and ≤0.005 mm flatness. Confirm parallelism, loading-land diameters and installed stack height.
Raised hub steps and recess depth are specified on the selected drawing. Factory electrical pairing does not remove the need to assess force shunts, support flexibility or installed preload.
Send the actual maximum shaft or bolt diameter, radial runout, assembly misalignment and temperature range. M8 describes a nominal thread size; it does not define the required smooth sensor bore.
One-piece engineering requests
Prototype and mixed metric / imperial requests are welcome for review. Changes to bore, OD or height alter stress and stiffness, so capacity and calibration must be revalidated. Tooling charges, pricing and dispatch dates are confirmed in the quotation.
Indicative mV/V bare-sensor range. MOQ one for prototype review.
02 / LOAD INTERFACE
+$25 / pair
HRC 48 ground parallel load washers, with loading-land geometry matched to the selected sensor.
03 / CONDITIONING
+$145 standard option
Factory paired USB or standard PLC module. Confirm the exact interface and calibration scope.
Illustrative configuration: $340 sensor + $25 washer pair + $145 standard conditioner = $510/set. Multi-channel, EtherCAT and special environmental options are quoted separately.
Volume quote bands: 1–4 prototypes; 5–19 pieces with a target 15% reduction; 20–49 pieces with a target 25% reduction; 50+ annual OEM agreement. Eligible ID/OD modifications target $0 NRE; new elastic-body designs require a separate review. Final pricing and dispatch appear in the formal quotation.
